transformer-coupling-audit-cites-every-source - Electronic Circuits XV & XVI: Transformers and Switched-Capacitor Conversion Step by Step

A transformer-coupling-audit-cites-every-source scan accepts the final bit only after transformer power, flux voltage, reflected load, and reset balance agree as one source chain. The 12 ohm reflected load, 12 W primary/secondary power, and accepted audit row are exact only for the stated ideal transformer ledger. Real hardware includes leakage, winding resistance, core loss, saturation, parasitic capacitance, switching loss, thermal limits, and measurement uncertainty.

The capstone accepts one coherent transformer-coupling ledger. Exact arithmetic here means exact results for the stated model inputs; measured inputs still carry uncertainty and significant-figure limits.

highlighted = computed this step

The audit accepts only a coherent transformer source chain

Transformer power, flux voltage, reflected load, and reset balance must agree before the final accepted bit is displayed.

\text{audit}=\text{transformer}+\text{flux}+\text{load}+\text{reset}

Load changes preserve the audit only when every cited source agrees

Each row rebuilds the full chain with a different secondary load.

\begin{array}{c|c|c|c}R_s&R_p&P_p&\text{gate}\\6\ \text{ohm}&24\ \text{ohm}&6\ \text{W}&\text{pass}\\3\ \text{ohm}&12\ \text{ohm}&12\ \text{W}&\text{pass}\\2\ \text{ohm}&8\ \text{ohm}&18\ \text{W}&\text{pass}\\\end{array}

The transformer audit cites every accepted source

The final accepted bit requires transformer power, flux voltage, reflected load, and reset balance to be one coherent source chain.

R_p=12\ \text{ohm}\quad P_p=P_s=12\ \text{W}\quad \text{audit}=\text{accepted}